From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Mon Jun 07 2004 - 22:02:43 GMT-3
Ludwig,
Install an ASP (ATM Switch Processor) in slot 13 of the 5500 and
then you can install LS1010 blades in ports 9-12.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/hardware/mod
ules/06atm.htm#20112
Keep in mind that the 5500 and its power supplies are MASSIVE,
and may incur large shipping costs if you're getting them off Ebay.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Ludwig Morales
> Sent: Monday, June 07, 2004 7:51 AM
> To: ccielab@groupstudy.com
> Subject: Lost in ATM
>
> Hi Everybody!!
>
> I wanted to ask, is there any module that i can add to a catalyst
> 5000/5500
> to use it as an atm swtich to practice ATM for my ccie lab, is this
> cheaper
> than a lightstream 1010.
>
> Also anyone know of other alternatives? i' ve heard of the Bay
Networks
> Centillion 100 , 3Com CoreBuilder 7000 but been know to ATM im not
sure
> about
> getting any of this without first consulting with you guys!!
> Your help is much appreciated.
>
> Regards,
>
> Ludwig
>
>
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:34 GMT-3