From: Koen Peetermans (K.Peetermans@chello.be)
Date: Mon Jun 07 2004 - 05:24:50 GMT-3
Thanks. Nothing to worry about then, since the ATM switch on the CCIE lab
would be configured correctly in case they would ask "Configure SVC without
using ILMI". They would need to give the NSAP addresses to be used on the
router for it to work.
Kind regards,
Koen.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Andy
Canizares
Sent: maandag 7 juni 2004 5:43
To: 'Carlos G Mendioroz'; 'Koen Peetermans'
Cc: ccielab@groupstudy.com
Subject: RE: ATM SVC's and ILMI
Take a look at the following link, it should provide some clarity.
http://www.cisco.com/en/US/tech/tk39/tk371/technologies_configuration_exampl
e09186a0080094b3d.shtml
As Carlos mentioned, without ILMI enabled, the switch would have to have the
NSAP addresses statically configured.
ILMI provides the uni autonegotiation and nsap address registration.
Cheers.
Andy
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Carlos G Mendioroz
Sent: Saturday, June 05, 2004 8:31 AM
To: Koen Peetermans
Cc: ccielab@groupstudy.com
Subject: Re: ATM SVC's and ILMI
One thing that could be making the difference is the registration that
ilmi does on the switch (a 1010 I guess).
That is not strictly necesary, but on the lab setup is the way the 1010
knows about your addresses. If you don't enable ilmi, you would need to
tell the ATM switch where the NSAPs live for it to be able to deliver
the call.
Koen Peetermans wrote:
> -----Original Message-----
> From: Koen Peetermans [mailto:K.Peetermans@chello.be]
> Sent: zaterdag 5 juni 2004 13:57
> To: 'Richard Dumoulin'
> Subject: RE: ATM SVC's and ILMI
>
> Hmmmmm. I've checked, I didn't forget the qsaal PVC.
>
> Solie only talks about the qsaal for SVC's. However,
> I can't get it working without ILMI...
>
> Koen
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of Richard Dumoulin
> Sent: zaterdag 5 juni 2004 13:38
> To: Koen Peetermans; ccielab@groupstudy.com
> Subject: RE: ATM SVC's and ILMI
>
> You need the signaling pvc 0/5 qsaal !! I believe this like enabling
> ISDN Q931. Although in ISDN it is automatically enabled,
>
> --Richard
>
> -----Original Message-----
> From: Koen Peetermans [mailto:K.Peetermans@chello.be]
> Sent: sabado, 05 de junio de 2004 10:32
> To: ccielab@groupstudy.com
> Subject: RE: ATM SVC's and ILMI
>
>
> (Sorry, pressed "send" involuntarily)
>
> Hi,
>
> I am practicing ATM on the CCIE4U remote lab.
>
> If you look in the Practical studies volume I book, Solie doesn't use
> ILMI for bringing up SVC's. However, I don't seem to get my SVC's
> working unless I enable the ILMI 0/16 pvc on the ATM main interface.
>
> The configuration looks like this:
>
>
>
> interface ATM0.99 multipoint
> ip address 10.10.10.2 255.255.255.0
> !
> svc nsap 47.00918100000000E01E35FB01.000800080008.00
> protocol ip 10.10.10.1 broadcast
> !
> atm nsap-address 47.00918100000000E01E35FB01.001200120012.00
>
> I don't think there is anything wrong with the config since enabling
> ILMI solves the problem.
>
> Could there be a way for doing it without using ILMI (perhaps an ATM
> static Route on the ATM switch ?)
>
> Kind regards,
>
> Koen.
>
> ______________________________________________________________________
> _
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________________
> _
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________________
> _
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:34 GMT-3