RE: qos-group command

From: Connelly Sylvester (Connelly.sylvester@btinternet.com)
Date: Sun Jun 06 2004 - 08:26:29 GMT-3


Hi John,

The do is not very clear on this, My understanding is the same as yours.

Regards,

Connelly

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of John
Underhill
Sent: 05 June 2004 21:02
To: ccielab@groupstudy.com
Subject: qos-group command

I need a confirmation on this.. if I wanted to match on origin network and
precedence value in CAR, I make an access list that matches the network and
precedence, then a route map that sets the qos-group, then match the qos
group
with CAR:
access-list 143 permit ip 172.16.43.0 0.0.0.255 any precedence critical
!
route-map PREC permit 10
match ip address 143
set ip qos-group 5
!
rate-limit output qos-group 5 120000 8000 16000 conform-action transmit
exceed-
action set-prec-transmit 3
Does that look right? Makes sense to me, but the docs are kind of muddy on
this..

appreciate it
John



This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:33 GMT-3