From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Fri Jun 04 2004 - 14:22:08 GMT-3
Mohit,
They are the same. The watch-disable command is depreciated.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Sharma, Mohit
> Sent: Friday, June 04, 2004 11:04 AM
> To: ccielab@groupstudy.com
> Subject: dialer watch-disable
>
> Hi All,
>
> Could somebody please explain the difference between the command-
> dialer watch-disable
> And the new command -
> dialer watch-list group-number delay {connect connect-time |
disconnect
> disconnect-time}
>
> Specially when the above command is used with the disconnect option.
>
> From my understanding the first command and the second command used
with
> the disconnect option both would delay the disconnection of the bri
> interface for the specified time, after the primary is up.
>
> Would really appreciate your inputs.
>
> Smiles,
>
> Mohit.
>
>
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:32 GMT-3