From: ume2tsu@yahoo.co.jp
Date: Thu Jun 03 2004 - 21:08:14 GMT-3
Dear all
Please let me know the difference of following two
configurations.
ex1) Etherchannel
interface Port-channel1
switchport trunk encapsulation dot1q
switchport mode access
no ip address
!
interface FastEthernet0/1
switchport trunk encapsulation dot1q
switchport mode access
no ip address
duplex full
speed 100
channel-group 1 mode active
channel-protocol lacp
lacp port-priority 1
!
interface FastEthernet0/2
switchport trunk encapsulation dot1q
switchport mode access
no ip address
duplex full
speed 100
channel-group 1 mode active
channel-protocol lacp
lacp port-priority 1
!
ex2) Trunk
interface FastEthernet0/1
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
duplex full
speed 100
!
interface FastEthernet0/2
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
duplex full
speed 100
!
The ex1) works as Etherchannel.
How about ex2) ? Does it work like ex1) ?
For example,if fast0/1 trunk down,does fast0/2 trunk work
as backup.And does fast0/1 and fast0/2 work with bundle ?
Please let me know the difference in detail.
regards.
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:32 GMT-3