From: Peng Zheng (zpnist@yahoo.com)
Date: Thu Jun 03 2004 - 13:11:24 GMT-3
Scenario:
R1 --- R2, R1 connects to R2 and R3 through
frame-relay, and there is ISDN connect between R1 and
R2. R2 connect to other part of network.
Requirement: 1. configure isdn between R1 and R2,
ensure only R1 can dial R2. Use authentication without
send the whole password.
(I think this will be done by only configure
dialer-group on R1 and chap authentication)
2. ISDN will come up if R1 lose connectivity to
network, and permit static route on each R1 and R2.
Ensure R1 can connect to other part of network.
Actully, I can not understand the come up. How to
define the come up. There are two cases: 1) use backup
interface, when primary interface is down, ISDN will
come out standby mode. 2) When some special routes
lose, R1 will dial R2 by dialer-watch.
So which one is correct?
__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:32 GMT-3