From: MMoniz (ccie2002@tampabay.rr.com)
Date: Wed Jun 02 2004 - 20:44:58 GMT-3
But I don't believe that is an SVI...Is it?
I sure don't see an L3 int for it?!?!?!?
Cat-3550#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Cat-3550(config)#vlan 100
Cat-3550(config-vlan)#state
Cat-3550(config-vlan)#state ac
Cat-3550(config-vlan)#^Z
at-3550#sho vlan
VLAN Name Status Ports
---- -------------------------------- --------- ----------------------------
---
1 default active Fa0/7, Fa0/8, Fa0/11, Fa0/22
Fa0/23, Gi0/1, Gi0/2
2 VLAN_2 active Fa0/3, Fa0/16, Fa0/17
4 VLAN_4 active Fa0/4, Fa0/5, Fa0/12, Fa0/19
Fa0/20
5 VLAN_5 active Fa0/21
6 VLAN_6 active Fa0/6, Fa0/9, Fa0/10
10 Test active
11 VLAN_11 active Fa0/18
12 VLAN_12 active Fa0/13, Fa0/14, Fa0/15
20 VDL_A active
21 Voice active
100 VLAN0100 active
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1
Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ----
--
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
6 enet 100006 1500 - - - - - 0 0
10 enet 100010 1500 - - - - - 0 0
11 enet 100011 1500 - - - - - 0 0
12 enet 100012 1500 - - - - - 0 0
20 enet 100020 1500 - - - - - 0 0
21 enet 100021 1500 - - - - - 0 0
100 enet 100100 1500 - - - - - 0 0
Remote SPAN VLANs
----------------------------------------------------------------------------
--
Primary Secondary Type Ports
------- --------- ----------------- ----------------------------------------
--
Cat-3550#int
Interface IP-Address OK? Method Status
Protocol
Vlan1 unassigned YES NVRAM administratively down
down
Vlan2 133.5.23.8 YES NVRAM up
up
Vlan12 133.5.25.8 YES manual up
up
FastEthernet0/1 unassigned YES unset up
up
FastEthernet0/2 unassigned YES unset up
up
Cat-3550#
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
GAD
Sent: Wednesday, June 02, 2004 7:38 PM
To: Stuart Reabow
Cc: ccielab@groupstudy.com
Subject: Re: 3550 VLAN interface
Since no one has really answered your question yet I will:
vlan 100
state active
As for why? Because you may be told to - that's why. :)
GAD
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:31 GMT-3