From: MADMAN (dmadlan@qwest.com)
Date: Wed Jun 02 2004 - 18:52:02 GMT-3
There are no keepalives on VLAN interfaces.
your not going to get the VLAN interface active without a active port
configured for that VLAN or and active trunk with that VLAN in it. What
would be the point? What are you trying to do? Stick a loopback plug
into a port if you want the VLAN active.
Dave
Kenneth Wygand wrote:
> Stuart,
>
> The physical port you can keep up by disabling keepalives ('no
> keepalive').
>
> I doubt this will work for a VLAN interface though.
>
> Kenneth E. Wygand
> Systems Engineer, Project Services
> CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
> Network+, A+
> Custom Computer Specialists, Inc.
> "The only unattainable goal is the one not attempted."
> -Anonymous
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Stuart Reabow
> Sent: Wednesday, June 02, 2004 2:52 PM
> To: ccielab@groupstudy.com
> Subject: 3550 VLAN interface
>
> Hi all,
>
> How do I keep a vlan interface up if it has no active ports, or no ports
> configured. Also, how can I keep a physical interface up if it has no
> link
> active?
>
> Thanks
>
> Stuart
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Emotion should reflect reason not guide it"
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:31 GMT-3