From: Malcolm Price (malcolm.price@lanbase.com)
Date: Wed Jun 02 2004 - 05:50:02 GMT-3
Noble,
Normally you would use a 2511 or a flavour of. That would give you 16 async
out-of-band connections, i.e. 16 rollover console style cables. Just plug
each of the console cables to each router and do your reverse telnet down
the associated line.
This should make it a little clearer,
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_exampl
e09186a008014f8e7.shtml
Regards,
Malcolm
CCIE #10607
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
tnoble@copycatltd.com
Sent: 02 June 2004 08:07
To: ccielab@groupstudy.com
Subject: Access Server Setup / Practice Lab Setup
Hello:
I am trying to setup a Practice Lab. I know that we can use one router as
the access server and connect to all other routers (reverse telnet). Can
anybody tell how do we connect the routers to the access server router...I
mean what cable / interface to use to connect between the access server
router and other routers.
Best Regards,
Noble
This archive was generated by hypermail 2.1.4 : Sat Jul 03 2004 - 19:40:31 GMT-3