Multicast helper-map example in doc CD.

From: Karim (karim_ccie@hotmail.com)
Date: Mon May 31 2004 - 19:56:34 GMT-3

• Next message: Yasser Aly: "RE: summary route"
• Previous message: Jason Aarons: "See something wrong with my AC? telnet is getting through"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi all,

I need someone help confirming that the multicast helper-map scenario in the
doc CD is configured the right way with no mistakes.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr_
c/ipcpt3/1cfmulti.htm#1003511

(Details in the link and the config. was as follows):
Router A-First Hop Router Configuration
interface ethernet 0
 ip directed-broadcast
 ip multicast helper-map broadcast 224.5.5.5 120
 ip pim dense-mode
!
access-list 120 permit udp any any 4000
access-list 120 deny udp any any
 ip forward-protocol udp 4000
Router C-Last Hop Router Configuration
interface ethernet 1
 ip directed-broadcast
 ip multicast helper-map 224.5.5.5 178.21.34.255 135
 ip pim dense-mode
!
access-list 135 permit udp any any 4000
access-list 135 deny udp any any
 ip forward-protocol udp 4000

Thanks in advance....
Karim.

• Next message: Yasser Aly: "RE: summary route"
• Previous message: Jason Aarons: "See something wrong with my AC? telnet is getting through"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:19 GMT-3