From: MMoniz (ccie2002@tampabay.rr.com)
Date: Fri May 28 2004 - 17:23:53 GMT-3
It is functionally replaced with:
Cat-3550(config-if)#ip verify uni ?
reverse-path Reverse path validation of source address (old command
format)<<<<<<<<<<
source Validation of source address
interface Vlan2
ip address 133.5.23.8 255.255.255.0
ip verify unicast source reachable-via rx
mike
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Kenneth Wygand
Sent: Friday, May 28, 2004 4:08 PM
To: Group Study
Subject: ip verify unicast reverse-path... GONE?!?!
Well...
Due to CDP bug I just upgraded a test 3550 EMI switch from 12.1(19)EA1
to 12.1(20)EA2. To my surprise, all of my interface configuration lines
"ip verify unicast reverse-path" are gone and the command is no longer
recognized.
I've searched each of the release notes incrementally from 12.1(19)EA1
through 12.1(20)EA2 and there is no mention of this command being
removed or the functionality replaced.
I've just checked the command references and it's not listed in either
version, but it was available in 12.1(19)EA1.
Any run into this before or have any ideas?
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"I am not really smart. I just stick with problems longer."
-Albert Einstein
Custom Computer Specialists, Inc.
"Celebrating 25 Years of Excellence"
[GroupStudy removed an attachment of type image/gif which had a name of
image001.gif]
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:19 GMT-3