From: ccie2be (ccie2be@nyc.rr.com)
Date: Fri May 28 2004 - 11:15:50 GMT-3
Hey Guys,
What determines how long it takes before Dialer Watch kicks in and triggers
a call?
I suspect it depends on waht routing protocol is running and how long it
takes the routing protocol to remove the watched routes from the routing
table. Is this true?
And, if so, is this info easily found on the Doc CD, so that I don't have to
memorize this info for each routing protocol before the lab?
Thanks in advance
----- Original Message -----
From: "Richard Dumoulin" <richard.dumoulin@vanco.es>
To: <vdadlaney@comcast.net>; <ccielab@groupstudy.com>
Sent: Friday, May 28, 2004 9:27 AM
Subject: RE: ISDN Dialer-Watch Question
> Yes, with a dialer string instead. But I thought it was well known,
>
> --Richard
>
> -----Original Message-----
> From: vdadlaney@comcast.net [mailto:vdadlaney@comcast.net]
> Sent: viernes, 28 de mayo de 2004 15:11
> To: ccielab@groupstudy.com
> Subject: ISDN Dialer-Watch Question
>
>
> Hi, has anyone seen a scenario where dialer watch is used for isdn backup
> but there is no dialer map for the watched network. I always thought this
> was a requirement but I have seen this working perfectly without the
command
> in a production network. The route being watched is a default route of
> 0.0.0.0 which is being provided by the primary router which has the
primary
> link. Appreciate your thoughts on this. Thanks
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:18 GMT-3