From: Kenneth Wygand (KWygand@customonline.com)
Date: Thu May 27 2004 - 11:44:43 GMT-3
Tim,
You can also match tags through the "redistribute" command:
R2(config-router)#redistribute eigrp 1 ?
metric Metric for redistributed routes
metric-type OSPF/IS-IS exterior metric type for redistributed routes
route-map Route map reference
subnets Consider subnets for redistribution into OSPF
tag Set tag for routes redistributed into OSPF
<cr>
R2(config-router)#redistribute eigrp 1 tag ?
<0-4294967295> 32-bit tag value
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"The only unattainable goal is the one not attempted."
-Anonymous
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie2be
Sent: Thursday, May 27, 2004 10:39 AM
To: Group Study
Subject: Matching on Tagged routes
Hi Guys,
Besides using a route-map, is there any other way to match a route based
on
it's tag?
For example, some type of access list?
Thanks
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:18 GMT-3