From: Bob Sinclair (bsin@cox.net)
Date: Wed May 26 2004 - 13:26:03 GMT-3
Charles,
I cannot find ip rsvp anywhere in the Cat3550 syntax, config guide or
command reference. Neither is it mentioned in the Cisco Catalyst Qos book
by Flannagan, et. al. It is available under the int vlan on my cat 6000 in
native mode.
As far as I can tell, RSVP is not supported on the 3550 or the 3750. You
might want to look into Auto QoS to guarantee voice bandwidth.
HTH,
Bob Sinclair
CCIE #10427, CISSP, MCSE
www.netmasterclass.net
----- Original Message -----
From: "Charles T. Alexander" <charles.t.alexander@verizon.net>
To: <ccielab@groupstudy.com>
Sent: Wednesday, May 26, 2004 11:36 AM
Subject: ip rsvp bandwith
> I have two phones on two different ethernets, which I have put ip rsvp
> bandwidth 24 24. I want to put the same statement on the vlans
> associated with these 2 ethernets but the command is not available on
> the Cat 3550 under the vlan.
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:17 GMT-3