From: Vazman@aol.com
Date: Tue May 25 2004 - 17:32:59 GMT-3
I am seeing a lot of bytes delayed and packets delayed when I do a "sh traffic-shape stat"
Topology is as follows:
Hub (hssi)--FR--(serial) Remote
Hub side has a 6 Mb port speed and remote side has a port speed of 1536K
There are 10 remote sites connected to the FR cloud, either directly to the Nortel passports or via a T1.
All PVC's have a guaranteed rate of 1536K with no bursting.
I have FRTS configured only on the hub side as follows:
int hssi1/0.1
ip add x.x.x.x 255.255.255.252
bandwidth 1536
frame-relay class T1
frame-relay interface-dlci 200
map-class frame-relay T1
frame-relay adaptive-shaping becn
frame-relay cir 1536000
frame-relay bc 192000
frame-relay be 0
frame-relay mincir 1536000
Sh int hssi1/0 showa input rate as 1160K and output rate as 600K but the bytes/packets delay are still incrementing.
Any suggestions?
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:17 GMT-3