RE: Policy map

From: Messina, John V. (john@crimsoncti.com)
Date: Tue May 25 2004 - 07:35:36 GMT-3

• Next message: Tom Young: "Cat6500's show flash command"
• Previous message: Nigel.Johnson@barclayscapital.com: "CAR vs Police"
• Maybe in reply to: Ahmed Mustafa: "Policy map"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

GW01(config)#class-map class

GW01(config-cmap)#match protocol icmp
GW01(config-cmap)#exi
GW01(config)#pol
GW01(config)#policy-map policy

GW01(config-pmap)#class class
GW01(config-pmap-c)#police ?
  <8000-2000000000> Bits per second
  cir Committed information rate

GW01(config-pmap-c)#police 8000

GW01#sh policy-map policy
  Policy Map policy
    Class class
     police cir 8000 bc 1500
       conform-action transmit
       exceed-action drop

-----Original Message-----
From: Ahmed Mustafa [mailto:ahmed.mustafa@sbcglobal.net]
Sent: Monday, May 24, 2004 3:19 PM
To: ccielab@groupstudy.com
Subject: Policy map

If you just configure the command, under Policy/Class map

police 2000, and leave the other options such as conform-action transmit
and
exceed-option drop. What will happen without manually configuring

polic 2000 conform-action transmit excee-action drop.

Regards,

• Next message: Tom Young: "Cat6500's show flash command"
• Previous message: Nigel.Johnson@barclayscapital.com: "CAR vs Police"
• Maybe in reply to: Ahmed Mustafa: "Policy map"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:16 GMT-3