From: MADMAN (dmadlan@qwest.com)
Date: Mon May 24 2004 - 13:10:35 GMT-3
Lord, Chris wrote:
> Hi,
>
> I would be greatful if anyone could assist me with a very basic ISDN query. If a task specifies that a call should only be initiated by one end of the link, I'm trying to sort out exactly what options are available to satisfy this.
>
> I'm only aware of two ways. One is to omit the "dialer-group" from one end so no interesting traffic is specified and the other is to remove the dial string from the "dialer map" statement at one end so it can't physically dial out. Are there any other obvious techniques.
>
> Also, assuming I have a "dialer-list 1 proto ip permit" and "dialer-gr 1" at both ends but I omit the dial string from one of the "dialer map" statements, the link comes up in one direction as desired but ping won't work even though the link is up. Why is this?
>
> Thanks,
>
> Chris
I think you need to dialer group regardless if you are dialing or not
to allow traffic to flow over the link.
Dave
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Emotion should reflect reason not guide it"
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:16 GMT-3