From: john matijevic (matijevi@bellsouth.net)
Date: Sun May 23 2004 - 13:11:11 GMT-3
Hello Joseph,
If you are trying to use VoIP with RSVP, then you need incoming
called-number XXX under the dial peer. I believe this topic was just
discussed if you search the archives.
Sincerely,
Matijevic
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joseph D. Phillips
Sent: Sunday, May 23, 2004 10:48 AM
To: Group Study (E-mail)
Subject: RSVP neighborship not forming
I started over and still can't get it to work.
Here are my configs, along with some show commands.
Anyone see a problem?
-----Original Message-----
From: Joseph D. Phillips [mailto:josephdphillips@hotmail.com]
Sent: Sunday, May 23, 2004 07:38
To: Joseph D. Phillips
Subject: RSVP configs
PDX-03#1
[Resuming connection 1 to r1 ... ]
hub140#
hub140#sho run
Building configuration...
Current configuration : 1300 bytes
!
version 12.2
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname hub140
!
logging rate-limit console 10 except errors
!
ip subnet-zero
no ip finger
no ip domain-lookup
!
no ip dhcp-client network-discovery
!
!
!
!
interface Ethernet0
--More-- no ip address
shutdown
!
interface Serial0
no ip address
encapsulation frame-relay
no arp frame-relay
no frame-relay inverse-arp
frame-relay lmi-type cisco
!
interface Serial0.14 multipoint
ip address 192.168.1.1 255.255.255.252
ip ospf network non-broadcast
frame-relay map ip 192.168.1.2 104 broadcast
!
interface Serial0.18 multipoint
ip address 192.168.2.1 255.255.255.252
ip ospf network non-broadcast
frame-relay map ip 192.168.2.2 108 broadcast
!
interface Serial1
no ip address
shutdown
--More-- !
interface BRI0
no ip address
shutdown
isdn x25 static-tei 0
cdapi buffers regular 0
cdapi buffers raw 0
cdapi buffers large 0
!
router ospf 110
router-id 1.1.1.1
log-adjacency-changes
network 192.168.1.1 0.0.0.0 area 0
network 192.168.2.1 0.0.0.0 area 0
neighbor 192.168.2.2 priority 1
neighbor 192.168.1.2 priority 1
!
ip kerberos source-interface any
ip classless
ip http server
!
!
!
--More-- line con 0
transport input none
line aux 0
line vty 0 4
!
end
hub140#sho in s0 t s0.14
Serial0.14 is up, line protocol is up
Hardware is HD64570
Internet address is 192.168.1.1/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY
hub140#sho in s0.18
Serial0.18 is up, line protocol is up
Hardware is HD64570
Internet address is 192.168.2.1/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY
hub140#sho int s0
Serial0 is up, line protocol is up
Hardware is HD64570
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY, loopback not set
Keepalive set (10 sec)
LMI enq sent 67, LMI stat recvd 67, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 1023 LMI type is CISCO frame relay DTE
FR SVC disabled, LAPF state down
Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface
broadcasts 0
Last input 00:00:05, output 00:00:06, output hang never
Last clearing of "show interface" counters 00:11:19
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 1158 kilobits/sec
5 minute input rate 1000 bits/sec, 1 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
299 packets input, 62151 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
--More-- 0 input errors, 0 CRC, 0 frame,
0 overrun, 0 ignored, 0 abort
138 packets output, 6735 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 output buffer failures, 0 output buffers swapped out
2 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
hub140#sho ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JK8OS-L), Version 12.2(1d), RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sun 03-Feb-02 22:01 by srani
Image text-base: 0x0307EEE0, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
RELEASE SOFTWARE (fc1)
hub140 uptime is 14 minutes
System returned to ROM by reload
System image file is "flash:/c2500-jk8os-l.122-1d.bin"
cisco 2500 (68030) processor (revision N) with 14336K/2048K bytes of
memory.
Processor board ID 11163258, with hardware revision 00000001
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
--More-- 1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
hub140#sh ip o ip ospf nei
Neighbor ID Pri State Dead Time Address
Interface
8.8.8.8 1 FULL/DR 00:01:34 192.168.2.2
Serial0.18
4.4.4.4 1 FULL/DR 00:01:34 192.168.1.2
Serial0.14
hub140#sho ip route ospf
hub140#
PDX-03#4
[Resuming connection 4 to r4 ... ]
store148#sho run
Building configuration...
Current configuration : 1303 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname store148
!
logging queue-limit 100
!
memory-size iomem 15
ip subnet-zero
!
!
no ip domain lookup
!
mpls ldp logging neighbor-changes
!
!
!
!
--More-- !
!
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
!
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0
ip address 192.168.1.2 255.255.255.252
encapsulation frame-relay
--More-- ip ospf network non-broadcast
fair-queue 64 256 37
no arp frame-relay
frame-relay map ip 192.168.1.1 401 broadcast
no frame-relay inverse-arp
frame-relay lmi-type cisco
ip rsvp bandwidth 1158 24
!
interface BRI0/0
no ip address
shutdown
!
router ospf 110
router-id 4.4.4.4
log-adjacency-changes
network 192.168.1.2 0.0.0.0 area 0
neighbor 192.168.1.1 priority 1
!
ip http server
ip classless
!
!
!
--More-- !
!
call rsvp-sync
!
voice-port 1/0/0
!
voice-port 1/0/1
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
dial-peer voice 4801 pots
destination-pattern 4801
port 1/0/0
!
dial-peer voice 4901 voip
destination-pattern 4901
session target ipv4:192.168.2.2
req-qos guaranteed-delay
--More-- !
!
line con 0
line aux 0
line vty 0 4
!
!
end
store148#sho int s0/0
Serial0/0 is up, line protocol is up
Hardware is PowerQUICC Serial
Internet address is 192.168.1.2/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY, loopback not set
Keepalive set (10 sec)
LMI enq sent 57, LMI stat recvd 57, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 1023 LMI type is CISCO frame relay DTE
FR SVC disabled, LAPF state down
Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface
broadcasts 0
Last input 00:00:08, output 00:00:08, output hang never
Last clearing of "show interface" counters 00:11:39
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 1158 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
218 packets input, 45569 bytes, 0 no buffer
--More-- Received 0 broadcasts, 0 runts,
0 giants, 0 throttles
1 input errors, 0 CRC, 1 frame, 0 overrun, 0 ignored, 0 abort
101 packets output, 4505 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
store148#sh ip ors rs
Rate Limiting: disabled
Max msgs per interval: 4
Interval length (msec): 20
Max queue size: 500
Max msgs per second: 200
Refresh Reduction: disabled
ACK delay (msec): 250
Initial retransmit delay (msec): 1000
Local epoch: 0x3280C7
Message IDs: in use 0, total allocated 0, total freed 0
Neighbors: 0
RSVP encap: 0 UDP encap: 0 RSVP and UDP encap: 0
Local policy:
COPS:
Generic policy settings:
Default policy: Accept all
Preemption: Disabled
store148#sho ip ospf nei
Neighbor ID Pri State Dead Time Address
Interface
1.1.1.1 1 FULL/BDR 00:01:40 192.168.1.1
Serial0/0
store148#sho ip route ospf
192.168.2.0/30 is subnetted, 1 subnets
O 192.168.2.0 [110/128] via 192.168.1.1, 00:06:56, Serial0/0
store148#sho ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.2(15)T11, RELEASE
SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 30-Jan-04 22:59 by nmasa
Image text-base: 0x80008098, data-base: 0x8195CFAC
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
store148 uptime is 14 minutes
System returned to ROM by reload
System image file is "flash:c2600-j1s3-mz.122-15.T11.bin"
cisco 2620 (MPC860) processor (revision 0x102) with 56320K/9216K bytes
of memory.
Processor board ID JAD042107UH (4018238988)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
Basic Rate ISDN software, Version 1.1.
1 FastEthernet/IEEE 802.3 interface(s)
--More-- 1 Serial network interface(s)
1 ISDN Basic Rate interface(s)
2 Voice FXS interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
store148#
PDX-03#8
[Resuming connection 8 to r8 ... ]
store149#sho run
Building configuration...
Current configuration : 1256 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname store149
!
logging queue-limit 100
!
memory-size iomem 15
ip subnet-zero
!
!
no ip domain lookup
!
!
!
!
!
!
--More-- !
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
!
!
interface Ethernet0/0
no ip address
shutdown
half-duplex
!
interface Serial0/0
ip address 192.168.2.2 255.255.255.252
encapsulation frame-relay
ip ospf network non-broadcast
fair-queue 64 256 37
--More-- no arp frame-relay
frame-relay map ip 192.168.2.1 801 broadcast
no frame-relay inverse-arp
frame-relay lmi-type cisco
ip rsvp bandwidth 1158 24
!
interface Serial0/1
no ip address
shutdown
!
router ospf 110
router-id 8.8.8.8
log-adjacency-changes
network 192.168.2.2 0.0.0.0 area 0
neighbor 192.168.2.1 priority 1
!
ip http server
ip classless
!
!
!
!
!
--More-- call rsvp-sync
!
voice-port 1/0/0
!
voice-port 1/0/1
!
!
mgcp profile default
!
dial-peer cor custom
!
!
!
dial-peer voice 4901 pots
destination-pattern 4901
port 1/0/0
!
dial-peer voice 4801 voip
destination-pattern 4801
session target ipv4:192.168.1.2
req-qos guaranteed-delay
!
!
--More-- line con 0
line aux 0
line vty 0 4
!
!
end
store149#sho int s0/0
Serial0/0 is up, line protocol is up
Hardware is QUICC Serial
Internet address is 192.168.2.2/30
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY, loopback not set
Keepalive set (10 sec)
LMI enq sent 63, LMI stat recvd 63, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 1023 LMI type is CISCO frame relay DTE
FR SVC disabled, LAPF state down
Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface
broadcasts 0
Last input 00:00:03, output 00:00:03, output hang never
Last clearing of "show interface" counters 00:10:35
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 1158 kilobits/sec
5 minute input rate 1000 bits/sec, 1 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
234 packets input, 50523 bytes, 0 no buffer
--More-- Received 0 broadcasts, 0 runts,
0 giants, 0 throttles
1 input errors, 0 CRC, 1 frame, 0 overrun, 0 ignored, 0 abort
98 packets output, 3851 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
store149#sho rs ip rs
Rate Limiting: disabled
Max msgs per interval: 4
Interval length (msec): 20
Max queue size: 500
Max msgs per second: 200
Refresh Reduction: disabled
ACK delay (msec): 250
Initial retransmit delay (msec): 1000
Local epoch: 0xCAAF08
Message IDs: in use 0, total allocated 0, total freed 0
Neighbors: 0
RSVP encap: 0 UDP encap: 0 RSVP and UDP encap: 0
Local policy:
COPS:
Generic policy settings:
Default policy: Accept all
Preemption: Disabled
store149#
store149#
store149#sho ver
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-J1S3-M), Version 12.2(15)T11, RELEASE
SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Sat 31-Jan-04 01:36 by nmasa
Image text-base: 0x60008950, data-base: 0x618DA000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
store149 uptime is 13 minutes
System returned to ROM by reload
System image file is "flash:c3620-j1s3-mz.122-15.T11.bin"
cisco 3620 (R4700) processor (revision 0x81) with 56320K/9216K bytes of
memory.
Processor board ID 19732708
R4700 CPU at 80Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
--More-- 2 Voice FXS interface(s)
DRAM configuration is 32 bits wide with parity disabled.
29K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
store149#
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:15 GMT-3