From: Andaluz, Danilo (danny.andaluz@hp.com)
Date: Thu May 20 2004 - 14:44:56 GMT-3
I think this is your answer for question 1:
snmp-server ip precedence 5
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12119ea1/3550c
r/cli2.htm#3069799
If it says "All network management traffic", I would say this is it.
Danny
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Peng Zheng
Sent: Thursday, May 20, 2004 2:35 AM
To: ccielab@groupstudy.com
Subject: Question About IEexpert Free Lab
About the advanced catalyst 3550 part of the free Lab
40:
The requirement are:
1. All network management traffic generated by switch1
should have the IP Precedence bit set to 5. You are
NOT allowed to configure MQC or PBR.
2. On switch2, VLAND devices are allowed to remain
cached in its forwarding table even if they dont
transmit a single packet for up to 6 minutes.
3. In the future switch2 will be connecting to a
cluster using its GigabitEthernet0/1 port.
Spanning tree on this port should be converged within
>1 second. Configure switch1 to send a trap to
140.10.69.101 whenever any of its ports flap, except
port FastEthernet0/1.
I think set aging time for mac-address-table can be
used for 2. But I have no idea for 1 and 3. Does
anyone know how to do this?
__________________________________
Do you Yahoo!?
Yahoo! Domains Claim yours for only $14.70/year
http://smallbusiness.promotions.yahoo.com/offer
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:14 GMT-3