From: wing_lam@jossynergy.com
Date: Mon May 17 2004 - 03:15:10 GMT-3
Dear all,
A question asking use a command to check the backup members in the VRRP
group at the master router; but the show vrrp command only shows the
router's own status. Does anyone knows how can I check the backup member in
the maaster router?
R1701ISHHK#sh vrrp (Active router)
Ethernet0 - Group 1
State is Master
Virtual IP address is 192.168.241.20
Virtual MAC address is 0000.5e00.0101
Advertisement interval is 1.000 sec
Preemption is enabled
min delay is 0.000 sec
Priority is 100
Track object 1 state Up decrement 30
Authentication is enabled
Master Router is 192.168.241.21 (local), priority is 100
Master Advertisement interval is 1.000 sec
Master Down interval is 3.609 sec
R1702ISHHK#sh vrrp
Ethernet0 - Group 1
State is Backup
Virtual IP address is 192.168.241.20
Virtual MAC address is 0000.5e00.0101
Advertisement interval is 1.000 sec
Preemption is enabled
min delay is 0.000 sec
Priority is 90
Track object 1 state Up decrement 30
Authentication is enabled
Master Router is 192.168.241.21, priority is 100
Master Advertisement interval is 1.000 sec
Master Down interval is 3.648 sec (expires in 2.764 sec)
Thanks,
Winglam
DISCLAIMER:- This email is confidential and intended only for the use of
the individual or entity named above and may contain information that is
privileged. If you are not the intended recipient, you are notified that
any dissemination, distribution or copying of this email is strictly
prohibited. If you have received this email in error, please notify us
immediately by return email or telephone and destroy the original message.
Thank you.
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:12 GMT-3