From: Shibu Nair (shinair@cisco.com)
Date: Sun May 16 2004 - 16:20:19 GMT-3
Hi
Please verify the following QoS/accesslist configs are valid and work as
expected.
class-map ftp
match access-group name ftp
policy-map share
class ftp
bandwidth percent 10
ip access-list extended ftp
permit tcp any any eq ftp
permit tcp any any eq ftp-data
interface Serial0
ip address 172.16.10.2 255.255.255.0
service-policy output share
Here i am allocating 10 percentage bandwidth for ftp packets..
Just to confirm...
Regards
Shibu
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:12 GMT-3