From: Ahmed Mustafa (ahmed.mustafa@sbcglobal.net)
Date: Sat May 15 2004 - 18:54:23 GMT-3
What would you use if the question is
generate alarm when intereface's output queue goes above 750 packets and
again below 100 packets.
Regards,
Ahmed
----- Original Message -----
From: <samccie2004@yahoo.co.uk>
To: "Ahmed Mustafa" <ahmed.mustafa@sbcglobal.net>; <ccielab@groupstudy.com>
Sent: Saturday, May 15, 2004 1:31 PM
Subject: RE: RMON
> The only guideleines I know of depends on the actual requirement.
> U can either measure and use an absolute value, or an average ie Delta
over
> 60seconds.
>
> If u want to get a trap when CPU reaches 75% for the 1st time, u use an
> absolute reading. But if u wanna do it if the CPU is consisten;y hitting
75%
> over 60seconds u use delta.
>
> Pls correct me if I am wrong
>
> Thanks
>
> Sam
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Ahmed Mustafa
> Sent: 15 May 2004 22:12
> To: ccielab@groupstudy.com
> Subject: RMON
>
>
> Is there any guidelines when to use "Absolute vs Delta", when configuring
> RMON.
>
> Regards,
>
> Ahmed
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:12 GMT-3