From: Lee Donald (Lee.Donald@bacs.co.uk)
Date: Thu May 13 2004 - 04:20:34 GMT-3
Put the other source in a different vlan. It is on another subnet so it should be I think.
Cheers.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
David Hurtado
Sent: 12 May 2004 20:12
To: ccielab@groupstudy.com
Subject: "no validate-update-source" for EIGRP
Hello everybody,
If i want that a router running RIP or IGRP doesn't check if the source IP address of incoming routing updates is on the same IP network as one of the
addresses defined for the receiving interface, i use:
no validate-update-source
But this command is only for RIP and IGRP. What about EIGRP? Is there some command or method to avoid this check?
Today i have a router (R6) receiving EIGRP updates from a router (R1) in a different subnet, but it didn't accept the updates:
*Mar 1 05:19:27.797: IP-EIGRP(Default-IP-Routing-Table:100): Neighbor
130.6.124.1 not on common subnet for Serial1/0
How can i solve it?
Thanks a lot
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:11 GMT-3