From: CCIE# 12388 (Nettable_walker@hotmail.com)
Date: Tue May 11 2004 - 22:46:55 GMT-3
which side is dialing ?
Also - do you have 192.168.1.1 on BOTH sides as you state ?
Richard
#12388
//
----- Original Message -----
From: "Yash Bajpai" <ccieyash@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, May 11, 2004 5:53 PM
Subject: ospf over async interface
> hello,
>
> this is my first email and i admit iam highly
> intimidated by the complexity of some of the questions
> posted.
>
> in any case, i have a seemingly simple issue with me.
> i have two 2600 routers connected back to back using
> the aux ports. i have the following configured on both
> ends on the async.
>
> interface Async65
> ip address 192.168.1.1 255.255.255.252
> ip directed-broadcast
> encapsulation ppp
> async dynamic routing
> async mode dedicated
>
> But no matter what i do, i cannot seem to get the ospf
> adjaceny UP with its async neighbor. the "sh ip ospf
> int" says the interface is passive. ofcourse, i have
> not configured any interface as passive on either
> router.
>
> anyone has any clues on what i might be missing here?
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Win a $20,000 Career Makeover at Yahoo! HotJobs
> http://hotjobs.sweepstakes.yahoo.com/careermakeover
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:10 GMT-3