From: Arifur Rahman (arahman@cisco.com)
Date: Sat May 08 2004 - 13:59:12 GMT-3
Hi Group
I need your help, my topology
R2-e0/0---172.16.23.x---e0/0-R3----host
I can ping r2 e0/0 but not e0/0 of r3 from host. But I can ping loopback of
r3. Appreciate your help.
r2#r
...
172.16.0.0/16 is variably subnetted, 3 subnets, 2 masks
C 172.16.23.0/24 is directly connected, Ethernet0/0
O E2 172.16.17.23/32 [110/20] via 172.16.23.3, 00:02:42, Ethernet0/0
r3#r
172.16.0.0/16 is variably subnetted, 4 subnets, 2 masks
C 172.16.33.0/24 is directly connected, Ethernet1/1
C 172.16.23.0/24 is directly connected, Ethernet1/0
M 172.16.17.23/32 [3/1] via 172.16.17.23, 00:54:35, Ethernet1/1
C 172.16.103.0/24 is directly connected, Loopback0
host#ping 172.16.23.3 repeat 1
Sending 1, 100-byte ICMP Echos to 172.16.23.3, timeout is 2 seconds:
.
Success rate is 0 percent (0/1)
host#ping 172.16.103.1 repeat 1
Sending 1, 100-byte ICMP Echos to 172.16.103.1, timeout is 2 seconds:
!
Success rate is 100 percent (1/1), round-trip min/avg/max = 1/1/1 ms
host#ping 172.16.23.2 repeat 1
Sending 1, 100-byte ICMP Echos to 172.16.23.2, timeout is 2 seconds:
!
Success rate is 100 percent (1/1), round-trip min/avg/max = 4/4/4 ms
thank you - Arif
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:07 GMT-3