From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Fri May 07 2004 - 20:30:37 GMT-3
Steve,
All ports on the 3550 default to dynamic desirable mode. They
will automatically negotiation trunking via Dynamic Trunking Protocol
(DTP) when interconnected. Therefore you don't need to perform any
configuration at all.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Steve Cromie
> Sent: Friday, May 07, 2004 4:07 PM
> To: ccielab@groupstudy.com
> Subject: 3550 trunk question
>
> I'm doing some practice labs. I am asked to "create two trunk ports on
> fa0/11 and fa0/12 between sw1 and sw2. You may not use the switchport
mode
> command or the switchport trunk encapsulation command.
>
> I have know idea how I can do this? Can anyone help.
>
> Thanks,
> Steve
>
>
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:06 GMT-3