From: Joseph Rinehart (jjrinehart@hotmail.com)
Date: Thu May 06 2004 - 13:19:35 GMT-3
I have a pair of 2620 (not XM) in my lab rack, and put in a 32 MB DRAM
upgrade. The router had the default memory in first but this is what I am
seeing...
R7-2620-2#sh version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS-M), Version 12.1(7), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Thu 22-Feb-01 13:59 by kellythw
Image text-base: 0x80008088, data-base: 0x80CBECA0
ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
R7-2620-2 uptime is 1 week, 5 days, 23 hours, 42 minutes
System returned to ROM by reload
System restarted at 09:36:08 UTC Fri Apr 23 2004
System image file is "flash:c2600-is-mz.121-7"
cisco 2620 (MPC860) processor (revision 0x600) with 26624K/6144K bytes of
memory
Processor board ID JAD05320Y3H (1298140830)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
4 ATM network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Any ideas? I would have to have to disassemble half my cabinet to straighten
out the problem but I cant run a very current IOS on 32MB of DRAM....
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:06 GMT-3