From: Kenneth Wygand (KWygand@customonline.com)
Date: Wed May 05 2004 - 17:27:23 GMT-3
Hello,
I am assuming you are using an ISDN simulator and not connecting the
router's BRI ports back-to-back, correct?
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"The only unattainable goal is the one not attempted."
-Anonymous
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
CCIE Canidate
Sent: Wednesday, May 05, 2004 4:09 PM
To: ccielab@groupstudy.com
Subject: Having trouble with Kaslow's ISDN example
I have been trying to make the basic ISDN config in Kaslow's book to
work, but am having issues. This is my config:
R1:
interface BRI0
ip address 172.16.1.1 255.255.255.0
encapsulation hdlc
dialer string 2222
dialer-group 1
isdn switch-type basic-ni
isdn spid1 22220101 2222
dialer-list 1 protocol ip permit
R2:
interface BRI0
ip address 172.16.1.2 255.255.255.0
no ip directed-broadcast
dialer string 1111
dialer-group 1
isdn switch-type basic-ni
isdn spid1 11110101 1111
dialer-list 1 protocol ip permit
----------------------------------END
I am trying to make this basic config work between 2 devices and am
getting stuffed. Can somebody point me in the right direction?
Thanks!
ISDN Challenged guy
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:05 GMT-3