From: Chad Hintz (ChadHin@clientlogic.com)
Date: Wed May 05 2004 - 12:17:51 GMT-3
2 minutes. you can change it with the dialer idle-timeout command. ex.
dialer idle-timeout 120(120 is the default) I usually change it to 30 sec
instead of 120.
HTH
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Yasser Aly
Sent: Wednesday, May 05, 2004 9:35 AM
To: ccielab@groupstudy.com
Subject: ISDN Remaining time
Hello,
In a scenario where I am supposed to bring both channels up once
connection has been made, I used the " ppp multilink links minimum 2 "
command. My question is that why in the output below of " sh isdn active "
it doesn't show the seconds left though it disconnects after 2 minutes -
which is the default idle-timeout of ISDN - "
Rack1R4#sh isdn active
----------------------------------------------------------------------------
----
ISDN ACTIVE CALLS
----------------------------------------------------------------------------
----
Call Calling Called Remote Seconds Seconds Seconds Charges
Type Number Number Name Used Left Idle
Units/Currency
----------------------------------------------------------------------------
----
Out ---N/A--- 8358662 Rack1R5 24 Unavail - 0
Out ---N/A--- 8358662 Rack1R5 21 Unavail - 0
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:05 GMT-3