From: Kian Wah Lai (kian_wah@qala.com.sg)
Date: Sat May 01 2004 - 23:48:11 GMT-3
R1 - ISDN - R2, only r2 can call r1
This config works with a real ISDN line, but can't work on the ISDN
simulator on PEC. Another thing with PEC ISDN is that I only get to bring up
the 1st channel. For basic-net3 (both labs are using this), no SPID are
required and my friend told me one number will bring up both channel.
R1:
interface BRI0/0
ip address 172.16.12.1 255.255.255.0
encapsulation ppp
dialer map ip 172.16.12.2 name r2 broadcast
isdn switch-type basic-net3
no peer neighbor-route
ppp authentication chap
end
R2:
interface BRI0/0
ip address 172.16.12.2 255.255.255.0
encapsulation ppp
dialer map ip 172.16.12.1 name r1 broadcast <num>
dialer watch-group 1
dialer-group 1
isdn switch-type basic-net3
no peer neighbor-route
ppp authentication chap
end
Regards,
Kian Wah Lai
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Kenneth Wygand
Sent: Sunday, May 02, 2004 10:32 AM
To: Kian Wah Lai; MMoniz; ccie2be; CCIE Canidate; ccielab@groupstudy.com
Subject: RE: What is the best way to become ISDN smart
Kian,
Can you post your configurations and describe the problem you are having?
Maybe we can help you! :)
Ken
-----Original Message-----
From: nobody@groupstudy.com on behalf of Kian Wah Lai
Sent: Sat 5/1/2004 9:11 PM
To: 'MMoniz'; 'ccie2be'; 'CCIE Canidate'; ccielab@groupstudy.com
Cc:
Subject: RE: What is the best way to become ISDN smart
One thing I'm curious about, I keep having problem with ISDN
simulator :(
However, when I copy the same config to a router with real ISDN
line, it
works perfectly fine.
Regards,
Kian Wah Lai
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
MMoniz
Sent: Sunday, May 02, 2004 3:53 AM
To: ccie2be; CCIE Canidate; ccielab@groupstudy.com
Subject: RE: What is the best way to become ISDN smart
Well another alternative is to become a gold member or other level
with
IPExpert and you will have access to NUMEROUS escenarios that will
not only
give you explanations but also the configs if you so choose to look
at. All
of them are
CCIE level but they also have CCNA and NP level.
This is inlcuded if you take like the VCLass or any other class I
believe
and it makes picking labs to do very simple.
For instance if I only want to go over ISDN they have a few labs
that are
just ISDN but also many other complex routing labs that include
ISDN.
Not that I am suggesting that any of the other products out there
are not
quality, but to me being able to access via
a "virtual" means is important to me. I want to be able to access
labs no
matter my physical location.
But it still all boils down to the same thing!!!learn, practice
practice
practice
just my opinion,
mike
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf
Of
ccie2be
Sent: Saturday, May 01, 2004 3:21 PM
To: CCIE Canidate; ccielab@groupstudy.com
Subject: Re: What is the best way to become ISDN smart
My suggestion would be to get your hands on a large set of practice
labs and
practice the isdn portion of each one. After doing 20 to 40 of
these
practice labs, you'll feel fairly confident of your ability to
handle ccie
level isdn config's. Of course, if there are other topics you want
or need
to practice, you'll find them covered in the practice labs as well.
Lots of companies these days offer practice lab workbooks, but for
my money,
I think those from Internetwork Expert are the best. They include
with
their practice labs comprehensive explanations of their solution at
no
additional cost whereas IPExpert offers no explanation at all or
just a
superficial one at best.
Each company I think also provides a sample lab you can download for
free so
you can decide based on your assessment of their sample lab.
good luck
----- Original Message -----
From: "CCIE Canidate" <cisco@heartofdarknessstudios.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, May 01, 2004 12:05 PM
Subject: What is the best way to become ISDN smart
> Hi everyone!
>
> I know that there is a way more gray matter here than at my house.
> Basically, I have all of the right gear and can understand the
basics,
> AND have already read a ton of Cisco documents, Kaslow's book, the
CISCO
> Press books, among others....and still am not sure how best to
assemble
> the most efficient configs required for CCIE level work. I want
to get
> the opinions of group members on what materials give me the "BEST"
> crawl, walk, run steps, procedures, and examples of how to setup
ISDN in
> preparation for the lab.
>
> Thanks,
>
> ISDN challenged guy
>
>
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:02 GMT-3