From: Dan (dans@danbsd.a.la)
Date: Sat May 01 2004 - 11:26:58 GMT-3
Why dialer class is not needed?
When configuring without a dialer, dialer class is need on the recieving
callback (the callback server)
On Sat, 1 May 2004 09:20:55 -0500, Larry Roberts
<groupstudy@american-hero.com> wrote:
> Below is a working callback configuration, using tacacs for
> authentication,
> however you could just as easily remove the tacacs stuff, add a username
> for
> the client on the server, and it should work.
>
> Both routers have the enable password set to cisco, a "dialer-list 1
> protocol ip permit" and on R1, there is a "username R3 password cisco"
> Where R3 is my server, and R1 is my client.
> Spids removed to protect my home numbers, my cell phone and my wife's
> cell
> phone :)
>
>
> Only thing that I have noticed, is that I sometimes need to reboot the
> server after building the initial configuration. Other than that, it
> works
> every time.
>
> CALLBACK SERVER
>
> interface BRI0/0
> no ip address
> encapsulation ppp
> dialer rotary-group 10
> isdn switch-type basic-ni
> isdn spid1 XXXXX XX
> isdn spid2 XXXXX XX
> ppp authentication chap
> no cdp enable
> !
> interface Dialer10
> ip address 1.1.1.2 255.255.255.0
> encapsulation ppp
> dialer in-band
> dialer aaa
> dialer idle-timeout 20
> dialer enable-timeout 10
> dialer hold-queue 20
> dialer-group 1
> no cdp enable
> ppp callback accept
> ppp authentication chap callin
>
> CALLBACK CLIENT
>
> interface BRI0/0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 XXXXX XX
> isdn spid2 XXXXX XX
> ppp authentication chap
> !
> interface Dialer1
> ip address 1.1.1.1 255.255.255.0
> encapsulation ppp
> dialer pool 1
> dialer idle-timeout 20
> dialer string XXXXXXX
> dialer hold-queue 20
> dialer-group 1
> no cdp enable
> ppp callback request
> ppp authentication chap
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> k c
> Sent: Saturday, May 01, 2004 5:56 AM
> To: ccielab@groupstudy.com
> Subject: Sample for PPP Callback Using Dialer Profile
>
> I can find only the sample config of ppp callback using Legacy DDR. Can
> anybody give me sample config or URL of ppp callback using dialer profile
> (not ISDN callback).
> Thanks.
>
> $@)g(b42!B?K*B$E$M!B)_,%'u:{45&^+H...
> &\ HIT 9aAn $u3t$U8|
> http://mobile.yahoo.com.hk/
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:02 GMT-3