From: ccie2be (ccie2be@nyc.rr.com)
Date: Sat May 01 2004 - 11:12:40 GMT-3
I hear you, but how would I do that? Is there a link you can point me to
that explains this?
Tim
----- Original Message -----
From: "Hannes Hannes" <agsrouter@firemail.de>
To: "ccie2be" <ccie2be@nyc.rr.com>
Sent: Saturday, May 01, 2004 9:38 AM
Subject: Re[2]: depends on the lab you get
> Hello ccie2be,
>
>
> in the red lab it says that you should be able to connect to a fax on
> the backbone router with a speed of 9k6 so you would be required to
> set the rate of the fax connection to that speed.
>
> i think it depends when you want to take the lab. if you take it soon
> u wont get that lab anyways because most peoples get the blue w/out
> voice
>
>
> ciao
>
>
>
> Saturday, May 1, 2004, 1:52:51 PM, you wrote:
>
> c> Hi Hannes,
>
> c> Thanks for getting back to me. I assumed that fax doesn't show up
often,
> c> but I just wanted to be prepared. Do you what info I would need to
> c> correctly configure fax and, if you can, would you mind giving me a
simple
> c> sample config?
>
> c> It would be greatly appreciated, Thanks
>
>
> c> ----- Original Message -----
> c> From: "Hannes Hannes" <agsrouter@firemail.de>
> c> To: <ccie2be@nyc.rr.com>
> c> Sent: Saturday, May 01, 2004 7:44 AM
> c> Subject: depends on the lab you get
>
>
> >> Hello ccie2be,
> >>
> >> well basicly there is only one lab where you have to set fax rate to
> >> 9k6. the lab which is active right now has no voice at all.
> >>
> >> ciao
> >>
> >>
> >>
> >> --
> >> Best regards,
> >> Hannes mailto:agsrouter@firemail.de
> >>
>
>
>
>
>
> --
> Best regards,
> Hannes mailto:agsrouter@firemail.de
This archive was generated by hypermail 2.1.4 : Wed Jun 02 2004 - 11:12:02 GMT-3