From: Richard Davidson (rich@myhomemail.net)
Date: Thu Apr 29 2004 - 23:25:35 GMT-3
I have done this on a switch but not on router.
However Port channel should work for you. see link.
--- Chris Larson <clarson52@comcast.net> wrote:
> If you could put the same IP or even the same subnet
> on 2 different
> interfaces in the same router, how would the router
> ever know which one to
> forward packets out of?
>
> What are you trying to accomplish beyond putting the
> same ip on 2
> interfaces?
>
>
>
>
> ----- Original Message -----
> From: "RExpert" <routerexpert@yahoo.com>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, April 29, 2004 3:47 PM
> Subject: Same IP on E0/0 and E0/1
>
>
> > I need help like right now - BIG Thanks to
> everyone that responds.
> >
> > I am trying to put the exact same IP Address on 2
> different ethernet
> interfaces. The only thing that I could think of is
> - interface multilink
> 1, but it is not working, here is my config:
> >
> > interface Multilink1
> > ip address 66.106.47.230 255.255.255.252
> > ppp multilink
> > multilink-group 1
> >
> > Ethernet 0/0
> >
> > no ip address
> > ip load-sharing per-packet
> > no ip mroute-cache
> > ppp multilink
> > multilink-group 1
> >
> > Ethernet 0/1
> >
> > no ip address
> > ip load-sharing per-packet
> > no ip mroute-cache
> > ppp multilink
> > multilink-group 1
> >
> >
> >
> > ---------------------------------
> > Do you Yahoo!?
> > Win a $20,000 Career Makeover at Yahoo! HotJobs
> >
> >
>
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:58 GMT-3