From: Howard C. Berkowitz (hcb@gettcomm.com)
Date: Thu Apr 29 2004 - 18:13:53 GMT-3
At 12:47 PM -0700 4/29/04, RExpert wrote:
>I need help like right now - BIG Thanks to everyone that responds.
>
>I am trying to put the exact same IP Address on 2 different ethernet
>interfaces. The only thing that I could think of is - interface
>multilink 1, but it is not working, here is my config:
What problem are you trying to solve by doing this? Some sort of
failover? Respond to a practice question?
Is this something that HSRP or VRRP could not do?
>
>interface Multilink1
> ip address 66.106.47.230 255.255.255.252
> ppp multilink
> multilink-group 1
>
>Ethernet 0/0
>
>no ip address
> ip load-sharing per-packet
> no ip mroute-cache
> ppp multilink
> multilink-group 1
>
>Ethernet 0/1
>
>no ip address
> ip load-sharing per-packet
> no ip mroute-cache
> ppp multilink
> multilink-group 1
>
>
>
>---------------------------------
>Do you Yahoo!?
>Win a $20,000 Career Makeover at Yahoo! HotJobs
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:58 GMT-3