From: Kenneth Wygand (KWygand@customonline.com)
Date: Thu Apr 29 2004 - 17:03:54 GMT-3
Man, did I botch this up... I'm gonna have to run these in the lab
before I send them out!
No, it should be "network 10.10.0.0 0.0.255.255 area 0".
Sorry! But there is still another "gotcha".
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"The only unattainable goal is the one not attempted."
-Anonymous
-----Original Message-----
From: Calton, Doug [mailto:Doug.Calton@getronics.com]
Sent: Thursday, April 29, 2004 4:03 PM
To: Kenneth Wygand
Subject: RE: Another Quiz
Two typos, then? The OSPF ntwk command was "Netwo 10.0.0.0
0.0.255.255", but all I/Fs have 10.10.x networks, so none would be
included. Or was that your point?
-----Original Message-----
From: Kenneth Wygand [mailto:KWygand@customonline.com]
Sent: Thursday, April 29, 2004 3:59 PM
To: Calton, Doug
Subject: RE: Another Quiz
Sorry, that was a typo. As per my response to the group that is
probably on its way through, pretend the interface IP addresses ended in
".1".
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"The only unattainable goal is the one not attempted." -Anonymous
-----Original Message-----
From: Calton, Doug [mailto:Doug.Calton@getronics.com]
Sent: Thursday, April 29, 2004 3:59 PM
To: Kenneth Wygand; ccielab@groupstudy.com
Subject: RE: Another Quiz
? Because of the mask, none of the networks will be included, since the
second octet is 10, not 0
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Kenneth Wygand
Sent: Thursday, April 29, 2004 3:47 PM
To: ccielab@groupstudy.com
Subject: Another Quiz
Here's another quiz... this one hung me up for a while until I realized
what I overlooked!
What is wrong (or just not typical) with the following configuration,
and what is the implication?
! START OF CONFIG
Int s0
Ip add 10.10.1.0 255.255.255.0
Ip ospf network point-to-multipoint
No sh
Int s1
Ip add 10.10.2.0 255.255.255.0
Ip ospf network point-to-point
No sh
Int e0
Ip add 10.10.3.0 255.255.255.0
Ip ospf network broadcast
No sh
Router Ospf 65535
Netwo 10.0.0.0 0.0.255.255
No auto
Pass s0
Pass e0
! END OF CONFIG
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"I am not really smart. I just stick with problems longer." -Albert
Einstein
Custom Computer Specialists, Inc.
"Celebrating 25 Years of Excellence"
[GroupStudy removed an attachment of type image/gif which had a name of
image001.gif]
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:58 GMT-3