From: Carlos Marchini (cmarchini@signetdiagnostic.com)
Date: Thu Apr 29 2004 - 16:58:12 GMT-3
The "Netwo 10.0.0.0 0.0.255.255" will not put any of the configured
interfaces in OSPF. need 0.255.255.255 mask.
Carlos Marchini
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Kenneth Wygand
Sent: Thursday, April 29, 2004 3:47 PM
To: ccielab@groupstudy.com
Subject: Another Quiz
Here's another quiz... this one hung me up for a while until I realized
what I overlooked!
What is wrong (or just not typical) with the following configuration,
and what is the implication?
! START OF CONFIG
Int s0
Ip add 10.10.1.0 255.255.255.0
Ip ospf network point-to-multipoint
No sh
Int s1
Ip add 10.10.2.0 255.255.255.0
Ip ospf network point-to-point
No sh
Int e0
Ip add 10.10.3.0 255.255.255.0
Ip ospf network broadcast
No sh
Router Ospf 65535
Netwo 10.0.0.0 0.0.255.255
No auto
Pass s0
Pass e0
! END OF CONFIG
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"I am not really smart. I just stick with problems longer."
-Albert Einstein
Custom Computer Specialists, Inc.
"Celebrating 25 Years of Excellence"
[GroupStudy removed an attachment of type image/gif which had a name of
image001.gif]
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:58 GMT-3