From: John Chung (jchung@kgia.com)
Date: Mon Apr 26 2004 - 23:26:37 GMT-3
Dear,
Did you the lmi type match?
Best regards.
JC
"Connelly Sylvester"
<connelly.Sylvester@btin To: <ccielab@groupstudy.com>
ternet.com> cc:
Sent by: Subject: 8-Port Async/Sync Network Module
nobody@groupstudy.com
27/04/2004 10:20
Please respond to
"Connelly Sylvester"
Guys,
I have a 3640 router with a 8-Port Async/Sync Network Module, this is
connected via the serial interface to selection of 2600 and 3620's routers.
I've set the 3640 interface to sync mode so that I can confugure the box as
a
Frame-relay switch. Unfortunately, the adjacent side keeps flapping (i.e
the
2600's & 3620) and I cannot understand why.... any ideas. Can't see what
else
I have to do.
Please note that the clock rate is set on the 3640 and is does not work
when
the frame is encapsulated into HDLC or Frame Relay.
Any help will be greatly appreciated.
Regards,
Connelly
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:55 GMT-3