From: Bob Sinclair (bsinclair@netmasterclass.net)
Date: Mon Apr 26 2004 - 11:43:28 GMT-3
Tim,
The documentation says port acls are not permitted on (L2) etherchannel
interfaces. Router acls are allowed on PO interfaces. I would take this
as sound advice, though I have found that port acls applied to L2
etherchannel interfaces are effective.
Docs say that port acls applied to trunk ports will filter all vlans on the
trunk, which appears to work in practice.
HTH,
Bob Sinclair
CCIE #10427, CISSP, MCSE
www.netmasterclass.net
----- Original Message -----
From: "Tim Last" <packtmon@yahoo.com>
To: "Group Study" <ccielab@groupstudy.com>
Sent: Monday, April 26, 2004 10:13 AM
Subject: 3550 - ip acl's on trunks
> Hi guys,
>
> I know that standard and extended ip acl's work without any additional
configuration statements on regular Cat 3550 L2 access ports (assuming the
acl isn't being used for QoS purposes).
>
> Is this also true if the port is a trunk or if ports have been grouped
into an etherchannel?
>
> Also, can ip acl's be applied to SVI's?
>
> Thanks in advanced, Tim
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Photos: High-quality 4x6 digital prints for 25"
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:55 GMT-3