From: Tim Last (packtmon@yahoo.com)
Date: Thu Apr 22 2004 - 18:26:25 GMT-3
Hi guys,
I found this example here:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a05.shtml
snmp-server host 10.10.10.10 public config bgp tty snmp-server enable traps config snmp-server enable traps bgp
I understand why the 1st first command is there, but why are the other 2
commands needed? Isn't it enough that that both "config" and "bgp" in the 1st command?
Or, is it really necessary to specify "config" and "bgp" twice, once
in the 1st command and again in the enable traps command.
Thanks in advance, Tim
---------------------------------
Do you Yahoo!?
Yahoo! Photos: High-quality 4x6 digital prints for 25"
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:52 GMT-3