From: Joseph D. Phillips (jphillips@ufcwdrugtrust.org)
Date: Wed Apr 21 2004 - 19:16:48 GMT-3
I found out I can't use modular QoS for certain things with IOS 12.2(d).
How would you convert the following to the older method?
class-map match-all rtp
match protocol rtp
policy-map rtp
class rtp
priority percent 25
interface Serial1/0
service-policy output rtp
The doc CD has me configuring a map-class, but I don't know if the command to use is correct:
map-class frame-relay rtp
frame-relay ip rtp priority 2000 16383 289
The show queue for that interface is:
r3#sho queue s1
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/3/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 1158 kilobits/sec
Do I just take 1158 and divide by 4 to get the 25% available bandwidth?
map-class frame-relay rtp
frame-relay priority
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:52 GMT-3