From: HP-France,ex2 ("SANCHEZ-MONGE,ANTONIO)
Date: Wed Apr 21 2004 - 18:27:58 GMT-3
In the lightstream command reference and configuration guide it is listed:
http://www.cisco.com/univercd/cc/td/doc/product/atm/c8540/12_1/12c_ey/comman
d/index.htm
But... Who cares ;)
-----Original Message-----
From: phase90 [mailto:phase90@comcast.net]
Sent: miircoles, 21 de abril de 2004 23:20
To: SANCHEZ-MONGE,ANTONIO (HP-France,ex2); 'Tim Last'; Group Study
Subject: Re: atm ilmi-keepalive
Cisco's ATM switches so not support ilmi-keepalives.
It does not matter whether the command is in the configuration or not.
Jerry
----- Original Message -----
From: "SANCHEZ-MONGE,ANTONIO (HP-France,ex2)" <antonio.sanchez-monge@hp.com>
To: "'Tim Last'" <packtmon@yahoo.com>; "Group Study"
<ccielab@groupstudy.com>
Sent: Wednesday, April 21, 2004 5:00 PM
Subject: RE: atm ilmi-keepalive
> Well Tim, if you know what ILMI does and what a keepalive is you
> should
not
> have problems in fully understanding the command.
>
> As you know in front of the router ATM interface there is a switch. If
> the switch has the keepalives turned on, you may do it on the router
> too.
That's
> useful for example if you want the router to make sure that the prefix
> it learnt one day ago is still valid. Or to make sure that the PVCs
> learned
by
> auto-discovery are still valid. Different switches may react different
> to keepalive configuration.
>
> In the CCIE lab you don't have access to the switch, so basically turn
> keepalives on/off if ILMI is needed and not working as expected.
>
> A piece of advice: be courteous, it's free ;)
>
>
> -----Original Message-----
> From: Tim Last [mailto:packtmon@yahoo.com]
> Sent: miircoles, 21 de abril de 2004 21:53
> To: SANCHEZ-MONGE,ANTONIO (HP-France,ex2); Group Study
> Subject: RE: atm ilmi-keepalive
>
>
> I'm sorry Ato, but knowing how to enable or disable doesn't tell me
> WHEN
OR
> WHY ilmi-keepalives are needed or not needed and that is what I'm
> trying
to
> understand. It's OK if you don't know yourself and can't give me any
> guidance.
>
> Hopefully, someone else on GS knows and will post a response.
>
> "SANCHEZ-MONGE,ANTONIO (HP-France,ex2)" <antonio.sanchez-monge@hp.com>
> wrote:
> Hi Tim,
>
> If you know what it does then that is all you need to know.
>
> You will see this command appear by default in some IOS releases, but
> that does not mean that the administrator typed it ;)
>
> Cheers,
> Ato.
>
> -----Original Message-----
> From: Tim Last [mailto:packtmon@yahoo.com]
> Sent: miircoles, 21 de abril de 2004 17:00
> To: Group Study
> Subject: atm ilmi-keepalive
>
>
> Hi guys,
>
> I know what "ATM ilmi-keepalive " does, but I can't figure out when
> it's needed or not needed.
>
> In some ATM config scenarios, I've seen it diabled but in other
> examples, it's enabled.
>
> Here's the link to the uninformative commadn reference.
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan
> _r/atmcmds/wrfabr.htm#1018074
>
> I'm hoping someone can explain when and why it should or sho uldn't be
used.
>
> Thanks in advance, Tim
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Photos: High-quality 4x6 digital prints for 25"
>
> ______________________________________________________________________
> _
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Do you Yahoo!?
> Yahoo! Photos: High-quality 4x6 digital prints for 25"
>
> ______________________________________________________________________
> _
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:52 GMT-3