From: HP-France,ex2 ("SANCHEZ-MONGE,ANTONIO)
Date: Wed Apr 21 2004 - 15:44:12 GMT-3
Hi Tim,
If you know what it does then that is all you need to know.
You will see this command appear by default in some IOS releases, but that
does not mean that the administrator typed it ;)
Cheers,
Ato.
-----Original Message-----
From: Tim Last [mailto:packtmon@yahoo.com]
Sent: miircoles, 21 de abril de 2004 17:00
To: Group Study
Subject: atm ilmi-keepalive
Hi guys,
I know what "ATM ilmi-keepalive <seconds>" does, but I can't figure out when
it's needed or not needed.
In some ATM config scenarios, I've seen it diabled but in other examples,
it's enabled.
Here's the link to the uninformative commadn reference.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fwan
_r/atmcmds/wrfabr.htm#1018074
I'm hoping someone can explain when and why it should or shouldn't be used.
Thanks in advance, Tim
---------------------------------
Do you Yahoo!?
Yahoo! Photos: High-quality 4x6 digital prints for 25"
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:51 GMT-3