From: Kenneth Wygand (KWygand@customonline.com)
Date: Wed Apr 21 2004 - 14:21:00 GMT-3
Input interface, not output interface.
From the command reference:
<snip>
log-input
(Optional) Includes the input interface and source MAC address or VC in
the logging output.
</snip>
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"The only unattainable goal is the one not attempted."
-Anonymous
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie2be
Sent: Wednesday, April 21, 2004 1:08 PM
To: Richard Dumoulin; ccielab@groupstudy.com
Subject: Re: ACL Log
log-input
But, be aware it only for incoming frames (it might be just outgoing
frames,
I forget which but I know it works only in one direction)
HTH
----- Original Message -----
From: "Richard Dumoulin" <richard.dumoulin@vanco.es>
To: <ccielab@groupstudy.com>
Sent: Wednesday, April 21, 2004 12:16 PM
Subject: ACL Log
> Hello group,
>
> If a task requires to put the "log" keyword" at the end of the
default
> deny any statement of an acl, what is the command to have also the mac
> address appear on the "sh log" ?
>
> Thx
>
> --Richard
>
>
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:51 GMT-3