From: Kenneth Wygand (KWygand@customonline.com)
Date: Wed Apr 21 2004 - 00:10:58 GMT-3
Make sure you have "no exec" on the async line... also try clearing the
line several times (5 times or so) and then try to connect again.
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"The only unattainable goal is the one not attempted."
-Anonymous
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccieprep
Sent: Tuesday, April 20, 2004 6:18 PM
To: ccielab@groupstudy.com
Subject: Reverse telnet to 3550 switch
Can anyone please advise me how to reverse telnet to 3550 switch. Is it
different from the way we reverse telnet to the routers ?
I have connected the Access server to the console port of all the
Routers and
switches. When I try connecting to the Switches I keep getting "access
denied"
and can't access the switch. But I can access the all the Routers.
TIA
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:51 GMT-3