From: Wright, Jeremy (wright@admworld.com)
Date: Tue Apr 20 2004 - 23:17:25 GMT-3
I can't see to get TED fired up. I pulled the info straight off CCO (minus IP's) and no output on debug crypto isakmp,ipsec,engine. No hits on my ACL either. Below are my configs. R1-R2(hub router)-R4
R1:
crypto isakmp policy 10
authentication pre-share
crypto isakmp key abc123 address 0.0.0.0 0.0.0.0
!
crypto ipsec transform-set ted-transforms esp-des esp-md5-hmac
!
crypto dynamic-map ted-map 10
set transform-set ted-transforms
match address 101
!
crypto map tedtag 10 ipsec-isakmp dynamic ted-map discover
interface FastEthernet0/0
ip address 192.168.15.1 255.255.255.0
interface Serial0/0
ip address 150.50.12.1 255.255.255.0
encapsulation frame-relay
frame-relay map ip 150.50.12.2 112 broadcast
no frame-relay inverse-arp
crypto map tedtag
ip route 0.0.0.0 0.0.0.0 150.50.12.2
access-list 101 permit ip 192.168.15.0 0.0.0.255 172.16.44.0 0.0.0.255
R2:interface Serial0.21 point-to-point
ip address 150.50.12.2 255.255.255.0
frame-relay interface-dlci 121
!
interface Serial0.24 point-to-point
ip address 150.50.24.2 255.255.255.0
frame-interface-dlci 124
ip route 172.16.44.0 255.255.255.0 150.50.24.4
ip route 192.168.15.0 255.255.255.0 150.50.12.1
R4:
crypto isakmp policy 10
authentication pre-share
crypto isakmp key abc123 address 0.0.0.0 0.0.0.0
!
crypto ipsec transform-set ted-transforms esp-des esp-md5-hmac
!
crypto dynamic-map ted-map 10
set transform-set ted-transforms
match address 101
!
crypto map tedtag 10 ipsec-isakmp dynamic ted-map discover
interface Ethernet0
ip address 172.16.44.4 255.255.255.0
!
interface Serial0
ip address 150.50.24.4 255.255.255.0
encapsulation frame-relay
frame-relay map ip 150.50.24.2 142 broadcast
no frame-relay inverse-arp
crypto map tedtag
!
access-list 101 permit ip 172.16.44.0 0.0.0.255 192.168.15.0 0.0.0.255
ip route 0.0.0.0 0.0.0.0 150.50.24.2
CONFIDENTIALITY NOTICE:
This message is intended for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.
If you have received this communication in error, please notify us immediately by email reply or by telephone and immediately delete this message and any attachments. In the U.S. call us toll free at (800) 637-5843.
Spanish, French, French (Canada), Portuguese, Polish, German, Dutch, Turkish, Russian, Japanese and Chinese: http://www.admworld.com/confidentiality.htm.
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:51 GMT-3