From: Richard Dumoulin (richard.dumoulin@vanco.es)
Date: Sun Apr 18 2004 - 17:11:35 GMT-3
Yep, strangely the first nibble is a decimal number !!
-----Original Message-----
From: Scott Morris [mailto:swm@emanon.com]
Sent: domingo, 18 de abril de 2004 21:56
To: Richard Dumoulin; 'Ahmed Mustafa'; ccielab@groupstudy.com
Subject: RE: What wrong with my NSAP Format
You were able to get an 8 and 9 to work in the first character? Cool....
guess the other docs I looked at were wrong as well. :)
I will add this to my collection of useless knowledge. heheheheh....
Scott
_____
From: Richard Dumoulin [mailto:richard.dumoulin@vanco.es]
Sent: Sunday, April 18, 2004 2:48 PM
To: Richard Dumoulin; Scott Morris; 'Ahmed Mustafa'; ccielab@groupstudy.com
Subject: RE: What wrong with my NSAP Format
Cisco says "On a Cisco router running IS-IS, a NET can be 8 to 20 bytes" -->
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123tcr/123ti
p2r/ip2_n1gt.htm#wp1040484
"eb.0001.0001.0002.00" has 8 bytes !!
I have tried several combinations and I think that with an 8 byte NET, the
first hexadecimal has to be between 0 and 9. So it must something like this
[0-9]X.XXXX.XXXX.XXXX.XX,
Regards
--Richard
-----Original Message-----
From: Richard Dumoulin
Sent: domingo, 18 de abril de 2004 21:37
To: Scott Morris; 'Ahmed Mustafa'; ccielab@groupstudy.com
Subject: RE: What wrong with my NSAP Format
And why does this one work ?
router isis
net 33.0001.0001.0004.00
--Richard
-----Original Message-----
From: Scott Morris [mailto:swm@emanon.com]
Sent: domingo, 18 de abril de 2004 21:26
To: 'Ahmed Mustafa'; ccielab@groupstudy.com
Subject: RE: What wrong with my NSAP Format
It's not long enough.
There's a 1-byte AFI, a 2-12 byte area id, a 6-byte system id and a 1-byte
Nselector.
Looking from your right hand side, you have the 1-byte Nsel by itself then
6-bytes for the system ID are "0001.0001.0002", that only leaves the "eb"
part. It needs to be both the AFI and the area ID which is technically not
possible.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, CISSP,
JNCIS, et al. IPExpert CCIE Program Manager IPExpert Sr. Technical
Instructor swm@emanon.com/smorris@ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ahmed Mustafa
Sent: Sunday, April 18, 2004 2:12 PM
To: ccielab@groupstudy.com
Subject: What wrong with my NSAP Format
Hi Group,
Can someone tell what I am doing wrong.
Rack1R2(config)#router isis
Rack1R2(config-router)#net eb.0001.0001.0002.00 Translating
"eb.0001.0001.0002.00"
^
% Invalid input detected at '^' marker.
Regards,
Ahmed
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:49 GMT-3