From: Scott Morris (swm@emanon.com)
Date: Sun Apr 18 2004 - 16:54:59 GMT-3
That's acutally valid as well (I went back to look things up)... With the
implementation of ISIS, CLNS actually accepts different formats of the area
and system ID messages. The AFI actually indicates the rest of the format
of the address (foreign to most of us, and WAY beyond the realm of caring
for many!).
The AFI format, at least all that I am aware of, have a 0 as the first bit
of the first nibble, which really means that you have 0-7 as a valid first
hex character instead of 0-F.
ATM is a little different, where it's a 12-20 byte rendition under more
stringent rules.
HTH,
Scott
_____
From: Richard Dumoulin [mailto:richard.dumoulin@vanco.es]
Sent: Sunday, April 18, 2004 2:37 PM
To: Scott Morris; 'Ahmed Mustafa'; ccielab@groupstudy.com
Subject: RE: What wrong with my NSAP Format
And why does this one work ?
router isis
net 33.0001.0001.0004.00
--Richard
-----Original Message-----
From: Scott Morris [mailto:swm@emanon.com]
Sent: domingo, 18 de abril de 2004 21:26
To: 'Ahmed Mustafa'; ccielab@groupstudy.com
Subject: RE: What wrong with my NSAP Format
It's not long enough.
There's a 1-byte AFI, a 2-12 byte area id, a 6-byte system id and a 1-byte
Nselector.
Looking from your right hand side, you have the 1-byte Nsel by itself then
6-bytes for the system ID are "0001.0001.0002", that only leaves the "eb"
part. It needs to be both the AFI and the area ID which is technically not
possible.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, CISSP,
JNCIS, et al. IPExpert CCIE Program Manager IPExpert Sr. Technical
Instructor swm@emanon.com/smorris@ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ahmed Mustafa
Sent: Sunday, April 18, 2004 2:12 PM
To: ccielab@groupstudy.com
Subject: What wrong with my NSAP Format
Hi Group,
Can someone tell what I am doing wrong.
Rack1R2(config)#router isis
Rack1R2(config-router)#net eb.0001.0001.0002.00 Translating
"eb.0001.0001.0002.00"
^
% Invalid input detected at '^' marker.
Regards,
Ahmed
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:49 GMT-3