From: sustundag@secura.com.tr
Date: Sat Apr 17 2004 - 07:28:45 GMT-3
I hade similar issue but it was related long urls (especially in https sites..) Especially in mail.yahoo.comand www.hotmail.com sites
I suggest to read this article This solved my problem
I have been getting same "page cannot be displayed" message
Serkan Ustundag
Network and Security Engineer
CCNP,CCDP,CCSE
CCSP (Cisco Certified Security Professional)
Cisco Network Management Specialist
sustundag@secura.com.tr
Secura bir TEPUM grup sirketidir
-----Original Message-----
From: Kenneth Wygand [mailto:KWygand@customonline.com]
Sent: Saturday, April 17, 2004 12:04 AM
To: ccielab@groupstudy.com
Subject: Pix 6.3(3) / Websense 5.1 - flaky?
I'm running a test environment where I'm trying to get the Pix to forward all web (http and https) traffic to a Websense 5.1 box. All blocked traffic (http) comes back with the typical websense "blocked" page, but all https traffic (allowed or not) comes back with the "page cannot be displayed". I've tried configuring the pix with both the "filter url https 0 0 0 0" and "filter https 443 0 0 0 0" command to no avail. Has anyone seen this before? Any fix? BTW, I'm running Pix version 6.3(3).
Thanks!
Ken
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:49 GMT-3