From: Peng Zheng (zpnist@yahoo.com)
Date: Fri Apr 16 2004 - 02:10:15 GMT-3
But what I want to do is shaping the rate based on the
path available bandwidth.
For example, r1---r2---r3---r4
r1 what to shape the traffic based on the available
bandwidth from r1 to r4, not the r1 interface.
--- JC Lim <bergerlim@hotpop.com> wrote:
> You can achieve using "bandwidth remaining percent"
>
>
http://www.cisco.com/warp/public/105/priorityvsbw.html#configuringtheban
> dwidthcommand
>
> Jit,
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> Lupi, Guy
> Sent: Thursday, April 15, 2004 11:49 PM
> To: 'Peng Zheng'; ccielab@groupstudy.com
> Subject: RE: Traffic Shaper based on available
> bandwidth
>
> Am I correct in stating that you want to shape to
> different values based
> on
> how much available bandwidth is on the interface at
> any given time? For
> example, shape web traffic to 200 Kbps normally but
> if the link is using
> a
> certain amount of bandwidth reduce this value to 100
> Kbps?
>
> -----Original Message-----
> From: Peng Zheng [mailto:zpnist@yahoo.com]
> Sent: Thursday, April 15, 2004 11:37 AM
> To: ccielab@groupstudy.com
> Subject: Traffic Shaper based on available bandwidth
>
>
> Is it possible to configure a Router to do traffic
> shaper based on available bandwidth? The available
> bandwidth is not a constant value but I can get in
> real-time. Is there any solution to this for Cisco
> router or even on Linux?
>
>
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Tax Center - File online by April 15th
> http://taxes.yahoo.com/filing.html
>
>
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:48 GMT-3