From: OzgurG@garanti.com.tr
Date: Mon Apr 12 2004 - 16:03:29 GMT-3
Karim i got you wrong then...
in show queuing random-detect output ,
you ll see the max-thresholds are by default equal to interface hold-queue for
all precedence levels.
and
you can calculate the min threshold levels , with the formula
min threshold level = (0.5 + p/18) X 40 ,
for precedence=p=0 min_threshold=20
p=1 min_threshold=0.55 X40 =22.22 rounded to 22
p=2 = 0.61X40 = 24.44 rounded down
to 24...etc
which you will also see in random-detect output
and it is general practice in lab preperation to assign default values for
unspecified parameters.
unless another requirement necessiates you change it.
good luck
Ozgur
________________________________
From: Karim [mailto:karim_ccie@hotmail.com]
Sent: Mon 4/12/2004 9:07 PM
To: Ozgur Guler (Garanti Teknoloji); ccielab@groupstudy.com
Subject: Re: IE lab.4 - QoS - task 9.1...
Hi Ozgur,
I didn't mean that I will write an incomplete command. What I meant is that
if the max-threshold and mark-prob-denominator are not given, I will use the
defaults values (I will use the show queuing command to double check these
values if can't recall it).
Karim.
----- Original Message -----
From: <OzgurG@garanti.com.tr>
To: <karim_ccie@hotmail.com>; <ccielab@groupstudy.com>
Sent: Monday, April 12, 2004 4:32 PM
Subject: RE: IE lab.4 - QoS - task 9.1...
you can not do that
R3(config-if)#random-detect precedence 0 15
% Incomplete command.
Ozgur
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Karim
Sent: Monday, April 12, 2004 4:04 PM
To: ccielab@groupstudy.com
Subject: IE lab.4 - QoS - task 9.1...
Hi Group,
It was requested to start dropping packets when there are 15 packets with an
IP precedence of routine in the queue. The solution included was:
int xx
random-detect
random-detect precedence 0 15 40 10
Does this mean that whenever the max-threshold and mark-prob-denominator are
not specified, I default values will be used (taken from the show queueing
command).
Am I missing something ??
Thanks for help,
Karim.
This archive was generated by hypermail 2.1.4 : Mon May 03 2004 - 19:48:46 GMT-3